Equipment Specs: IF8C5 Fibrescope

Outside Dia of Scope 8.4mm
Working length 1.5 metres
Insertion Tube
- Distal end, rigid
- Bending section
21.9mm
up 120 degrees, right 100 degrees
left 100 degrees
Bending Radius 50mm
Light guide 2000mm
Light Sources 150 Watt halogen and 250 watt halogen

Optical System
(Field of view, direction of view, depth of field & illumination system)
Forward Viewing lens 30 degrees 60mm to 250mm
Forward Viewing lens 60 degrees 20mm to Infinity
Forward Viewing lens 100 degrees 9mm to 200mm
Side Viewing lens 30 degrees 45mm to 90mm
Photo Documentation
- Camera 35mm
- 3.5 floppy disc
- video

800ASA
J-Peg format
Video Super VHS and DV

Electrical Specification for ILK - C 150W Light Source
Power Supply AC 240 volt power or
Power input AC 2.4A
Power Consumption AC Max 530VA
DC 12V negative
DC Input 13A(+12V)
DC Max 200W
Frequency 50/60 Hz
Power&nbspfluctuations&nbspAC
DC fluctuations
+ or - 10%
-0.3V to + 3V
Operating&nbsptemperature
- Ambient
- Relative humidity
- Pressure
0 - 40 degrees C
15 - 90% (with no condensation)
1013hPa
Operating Environments of tube & adaptors
- Insertion tube & optical adaptor

- Other portions except insertion tube		 In air: -10 degrees C to 80 degrees C
In water: -10 degrees C to 80 degrees C
In air: -10 degrees C to 50 degrees C

Fluid Resistance
- Insertion tube & optical adaptor

- All portions except insertion tube		 Withstands machine oil, light oil and 5% salt water (10 degrees C to 30 degrees), 1013hPa
Avoid contact (adhering drops) with other fluids than water.

Waterproofness Properties
- Insertion tube & optical adaptor
- All portions exept insertion
Waterproof. Use in fluids possible
Drip proof. May be used under conditions where tube water drops adhere.