Olympus Iplex FX Videoscope

IPLEX FX

Introducing a videoscope system that combines portability with performance; modularity with reliability; simplicity with advanced functionality; ease of use with durability. Only one product does this - the new IPLEX FX.

The IPLEX FX introduces new levels of durability to industrial videoscopes with its shock-resistant case design and wear-resistant scope exterior. Adding
"strength-of-construction" to a frequently used, job-essential tool produces one tough, reliable and long-lasting piece of industrial inspection equipment.

Cast Magnesium-Alloy Chassis for Impact Resistance

The main component of the IPLEX FX base unit chassis is Magnesium - renowned for its strength and light weight. A typical material used for industrial environment equipment, Magnesium was chosen to provide the impact resistance and solid base that withstands the knocks and bumps that commonly occur to industrial videoscopes. In addition to a crush-resistant chassis each corner is protected by rubber bumpers, further softening a drop and maximising product reliability while reducing potential for damage. The IPLEX FX survived the repetitive 4 feet drop test for compliance to MIL-STD 810F.*

The chassis corners are protected by rubber bumpers to reduce the impact force created by the typical bumps and knocks of an industrial workplace The crush resistant cast magnesium chassis is the core of the IPLEX FX mechanical design strength. The extra durability in construction results in extra protection against equipment damages. * MIL-STD (The United States Defense Standard) is used to help achieve standardization objectives by the U.S. Department of Defense.

Abrasion Resistant Insertion Tube

The most critical component of any remote visual inspection tool is the insertion tube. It performs the basic requirement of accessing the inspection area and frequently navigating through narrow paths with abrasive and rough surfaces. The IPLEX FX insertion tube is the latest Olympus IPLEX design, with enhanced crush protection and 3x greater fray resistance. Strength was added to the insertion tube without compromising the flexibility and ability to navigate through the most difficult inspections. As with all of our IPLEX products, the IPLEX FX is designed with the Olympus Tough TaperFlex graduated stiffness design for maximum scope flexibility towards the scope end. The IPLEX FX scope unit is available in three insertion tube diameters: 6.0mm, 4.0mm and a 6.2mm model with internal working channel.*

The simplicity and portability of Olympus videoscopes has seen their usage extend to areas not considered 'traditional' application areas. Go to these harsher environments, but take a system designed for the job… IPLEX FX.

True Portability - Compact, Lightweight, Battery-Powered

Power is provided to the FX by an internally mounted, Lithium-Ion battery which provides over two hours runtime. The compact size of the FX makes portable operation a reality - either body-wear the light weight system or place it on a surface and allow the non-slip, rubber corners to hold it in place while you carry out your inspections.

Temperature Resistance

The FX scope units are resistant to insertion in higher temperature environments - now 100°C (210°F) meaning that inspections can take place sooner as you won't need to wait as long for the area to cool. Additionally the 6.0mm and 4.0mm diameter scope units both feature a temperature sensor to provide a two-stage visual warning to prevent reaching an over-temperature situation.

Resistance to harsh environments

To prevent the ingress of debris, all mechanical joints are hermetically sealed and input/output connectors are covered. IPLEX FX complies with internationally recognised Military Standards (MILSTD 810F*). This compliance assures a greater level of environmental performance than regular industry standards and provides increased reliability against dust and fluid. The inventive design of the FX has removed the need for a cooling fan, and therefore no air intake is required. This results in even greater environmental resistance.

IPLEX FX is MIL-STD 810F and MIL-STD 461E tested.

As a leader in the photographic camera market, Olympus understands what is needed to deliver accurate and colour-rich images and this experience
continues to be transferred to Industrial inspection equipment.

Daylight-view High Resolution LCD Monitor

Clear observation in direct sunlight is made possible with the new 6.5-inch daylight-view LCD monitor - the minimum recommended screen size for accurate and reliable observation of fine detail. Colour reproduction and contrast are maintained, ensuring inspections are not compromised　when working outdoors. The environmental resistance of the LCD also matches that of the IPLEX FX system.

Optimised optical system with interchangeable LED tip adaptors

To meet the requirement for high quality, true image reproduction and colour, the IPLEX FX features an optimised optical system and WiDER™ Wide Dynamic Range* image processing.

This Olympus-unique technology allows bright, contrastbalanced images to be produced across the entire depth of field.

*The WiDER™ image processing algorithm greatly expands the dynamic range to bring out details in shadows and highlights and allow much more accurate inspection.

Image at standard gain setting.		Image with WiDER gain applied. WiDER gain brightens the darker areas while maintaining the light level and details shown in the bright area.

New LED illumination with SmartTip™ tip adaptors

Now the light source is in the SmartTip™ optical adaptor with LED's providing illumination, meaning lamp changes are no longer required. This revolutionary new design contributes to reduction in overall system size and power consumption, while maintaining the ability to change direction of view and field of view. This design applies to SmartTip™ optical adaptors for both standard inspections and Stereo Measurement for all three insertion tube diameters. Additionally, Hi-Beam mode boosts illumination up to 1.5x for expanded inspection capability.

The IPLEX FX can perform almost any kind of inspection thanks to a wide range of interchangeable scopes, including models up to 18 m long and one with a working channel. More than just another inspection tool, the IPLEX FX is a reliable, feature-rich system capable of precise, real-time measurement and foreign object retrieval.

Measurement Accuracy

The IPLEX FX uses Stereo Measurement technology for accurate, three-dimensional defect measurement at any target angle. With the addition of Olympus' unique Multi and Offset Measurement modes, the IPLEX FX offers a more intuitive measurement environment with eight different modes for accurate evaluation of most inspection targets. Multi Measurement mode is a quick two-point defect identification technique that simultaneously calculates point-to-line, area and distance results. Stereo Measurement tip adaptors are available in direct and side view models for all three insertion tube diameters.

IPLEX FX Stereo Measurement Modes
Distance Point-to-line Depth Area Lines Profile Multi Offset (New)
	Multi Measurement Mode

Our unique IPLEX Spot-Ranging™ feature provides the industry's only live, real-time tip-to-target distance measurement. As a rule, videoscope measurement accuracy is dependent on the scope's distance from the measurement target. With the IPLEX FX, the user can easily determine whether the scope tip is close enough to calculate the most accurate and confident measurement on the first try.

Interchangeable Scopes

The IPLEX FX offers a range of interchangeable scopes, allowing you to choose the right one to fit the job. This means a single IPLEX FX can be configured for a variety of inspections. Scopes are available in diameters of 4.0 mm and 6.0 mm and in various lengths ranging from 2 m to 18 m. A 7.5 m scope with a smooth outer coating is also offered. This scope is ideally suited to nuclear and pharmaceutical inspections where ease of cleaning and decontamination are priorities.

Foreign Object Retrieval

Adding to the array of versatile IPLEX FX benefits is a new 6.2 mm diameter scope featuring an internal working channel. Six retrieval tools allow you to remove foreign objects from inside inspection areas - ideal for helping avoid costly overhauls - and perform hook and drag inspections in engines. Both forward and side view Stereo Measurement tip adaptors are also available with the working channel scope, providing a complete inspection solution.

These days, inspections don't end when you've packed up your borescope. It's just the beginning. The IPLEX FX is equipped with an array of recording options
and external interface solutions for a seamless transition to post-inspection analysis, archiving and measurements.

ImageNotepad™ for Extended Image Annotation

Information frequently needs to be added to videoscope images to aid post-inspection diagnosis and create reports. IPLEX FX makes this process an integral part of inspections with easy-to-use ImageNotepad™. Fields for titles and text are available for entering key words and phrases to allow extended descriptions of inspected objects. Additionally, text input is simplified by display of a list of predicted words each time a letter is entered. This valuable information is immediately accessible as part of each image when inspection data is transferred to a computer.

Inspection Recording Options

Archiving, sharing and reporting inspection results are made simple with the IPLEX FX. The IPLEX FX features still image and movie recording to internal memory, removable compact flash card or USB flash drive. Due to the rigours of the industrial inspection workplace, the IPLEX FX is designed to store images on solid-state media devices, ensuring that valuable data is not lost due to the instability of recording devices with movable parts. All recording formats are compatible with standard Windows operating systems (still format: JPEG, TIFF; movie format: AVI) and can be easily used in many report templates or attached to emails for instant sharing of inspection results. For other recording formats, the IPLEX FX is also compatible with many external recording devices through standard s-video and composite video outputs.

IPLEX Viewer Plus Software

The new IPLEX Viewer Plus software is a PC-based program featuring standard image viewing, file management and post-inspection stereo measurement calculations. Recognizing that inspection software is required by both the inspector and off-site personnel, IPLEX Viewer Plus is designed to be easily shared and used without PC administrator level installation. IPLEX Viewer Plus is available as a free website download.

With the IPLEX FX quick access control buttons and intuitive software menu, inspectors of all skill levels can easily utilise the advanced software features that produce accurate and confident inspection results.

I. TrueFeel™ Scope Tip Articulation

The IPLEX FX features TrueFeel scope tip articulation for power-assisted manual articulation and precision control. With instant movement and accurate feel, the user takes full control of the scope position resulting in easier and faster inspections.

II. SmartTip™ Automatic Recognition Technology

The IPLEX FX introduces the industry's first intelligent tip adapters. SmartTip optical tip adapters are uniquely identified allowing instant system settings change to match the tip adapter optics and features without the need for manual user selection.

III. Quick-Access Hot Buttons

The all-new controller maximises the use of buttons, levers and joysticks for quick access to all essential menu functions. Image enhancements, recording buttons and measurement features are among the many basicto- advanced features that are at the tip of your fingers.

IV. Dual Recording Button

FRZ/REC located on both sides of IPLEX FX controller to accommodate both left-handed and right-handed users.

V. One-handed scope control and interface

The ergonomic 750g scope handset is designed for comfort and quick access to all frequently used menu commands. The unique IPLEX dual joystick design separates tip articulation and menu navigation providing a more intuitive and comprehensible interface.

IPLEX FX: Specifications Remote Visual Inspection

Scope Unit Model Outer Diameter Scope Length Exterior Tube Flexibility Articulation Angle Approximate Weight IV8420 Ø4.0mm 2.0m Tungsten braid with special processing Fixed hard tube*1 4-way, UP / DOWN / RIGHT / LEFT 130° 1.7 kg IV8435 3.5m 1.9 kg IV8620 Ø6.0mm 2.0m TTF tube*2 4-way, UP / DOWN / RIGHT / LEFT150° 1.7 kg IV8635 3.5m 4-way, UP / DOWN / RIGHT / LEFT 130° 1.9kg IV8635X1 3.5m with working channel 4-way, UP / DOWN / RIGHT / LEFT 120° IV8650 5.0m 4-way, UP / DOWN / RIGHT / LEFT 110° 2.0kg IV8675 7.5m 4-way, UP / DOWN / RIGHT / LEFT 90° 2.2kg IV8675X2 Smooth resin coating IV86120 12.0m Tungsten braid with special processing Fixed hard tube*1 4-way, UP / DOWN / RIGHT / LEFT 70° 2.6kg IV86180 18.0m 4-way, UP / DOWN / RIGHT / LEFT 50° 3.1kg *1 Fixed hard tube from the distal end of the insertion tube to the control unit. *2 TTF tube with flexibility gradually increasing toward the distal end. Optics Field of View Selectable by optical adapter Adapter for Stereo Measurement attachable Illumination Method High-intensity white color LED with 2-stage illumination Articulation Control Joystick with TrueFeel TM power assisted mechanism Dimensions (control unit) 311(W) x 93(D) x 192(H)mm (without insertion unit and connector cable, including protrusions) Base Unit Exposure Adjustable CCD exposure time. NTSC: 1/2 to 1/30000 second, PAL: 1/2 to 1/25000 second Image Controls 9 step digital brightness control 5 step contrast adjustment for frozen and retrieved images. Adjustable Gain Control 4 step adjustable gain control with exclusive WiDER™ brightness level balancing technology. Noise Reduction Decreases static interference in images. Zoom Digital seamless zoom up to 3x Input/Output Terminal Video Signal Output BNC x 1, S-Video x 1 Audio Signal Input ø3.5mm monaural mini jack USB Terminal One terminal (ver. 1.1 compliance) Still Image Recording File Format JPEG compression (Exif 2 compliance), super high quality (SHQ), high quality (HIGH), standard quality (STD) * Recording to high quality (HIGH) of JPEG compression (Exif 2 compliance) or unpressed TIFF (TIFF-YC) when stereo optical adapter is selected. Audio Recording WAV format (Max. 60sec., interruptible) Movie Recording File Format AVI M-JPEG (with fixed compression rate) * Writable to end of last recorded movie data Audio Recording Selectable before recording movie Image Data Management Image Title/Note Entry Selectable 30 character title with date, time and system settings. Additional data can be inputted in NOTE having capability of 10 contents in total by category. Available to input 12 characters for a category and 28 characters for a content. Search Searchable by date Image Comparison Simultaneous display of live image and captured image Measurement Functions Scalar Measurement Measures the distance between points. The calculation is based on the known length in the same inspection image. Stereo Measurement (distance) Measures the distance between the two plotted points. Stereo Measurement (lines) Calculates the distance among multiple designated positions (Max 20 points) Stereo Measurement (area) Calculates the area surrounded by multiple designated positions (Max 20 points) Stereo Measurement (point-to-line) Measures the distance between a hypothetical line between two designated positions and the required point. Stereo Measurement (depth) Measures the depth/height from a hypothetical plane inside three disignated positions to the required point. Stereo Measurement (Multi) Automatically detects and measures damaged width/depth/area between two sepcified spots. Stereo Measurement (profile) The cross section of two designated points is represented with computer graphics. Stereo Measurement (Offset) Point-to-Line measurement with a parallel line passing on a measurement point. Spot Ranging (object distance) Measures object distance between tip of scope and cursor Save Measurement Results Measurement results can be saved along with the images. Removable Storage Medium 1GB Compact Flash Card provided as standard Compatible with recommended Compact Flash cards up to 4GB Internal Memory 1GB LCD 6.5-inch daylighｔ-view LCD, low reflection type Power Supply AC 100V-240V, 50/60Hz (with AC adapter) DC 14.8V (with specified battery) Battery Operation Time More than 150min. (with new battery) Dimensions 216(W) x 126(D) x 249(H)mm (excluding protrusions) 250(W) x 160(D) x 285(H)mm (including protrusions) Weight Approx.4.9kg (with battery) Optical Adapter Scope Optical Adapter Optical System Distal End 　 　 Field of view Direction of view Depth of field F No. Outer diameter Rigid distal end length* IV84 AT120D / NF-IV84 120° Forward 4-190mm 9.2 ø4.0mm 19.7mm AT120D / FF-IV84 120° 25-∞mm 3.3 19.6mm AT120S / NF-IV84 120° Side 1-20mm 9.6 22.2mm AT120S / FF-IV84 120° 6-∞mm 6 22.2mm AT50D / 50D-IV84 50°/50° Forward/Forward 5-∞mm 7.5 25.0mm AT50S / 50S-IV84 50°/50° Side/Side 4-∞mm 7.5 28.8mm 　 IV86 Excluding IV8635X1 　 　 　 　 　 　 AT40D-IV86 40° Forward 200-∞mm 2.4 ø6.0mm 19.8mm AT80D / NF-IV86 80° 8-∞mm 9.5 19.8mm AT80D / FF-IV86 80° 35-∞mm 3.1 19.8mm AT120D / NF-IV86 120° 4-190mm 9.2 19.8mm AT120D / FF-IV86 120° 25-∞mm 3.3 19.8mm AT80S-IV86 80° Side 18-∞mm 4 25.2mm AT120S / NF-IV86 120° 1-25mm 9.6 25.2mm AT120S / FF-IV86 120° 5-∞mm 5.9 25.2mm AT60D / 60D-IV86 60°/60° Forward/Forward 5-∞mm 7.5 25.9mm AT60S / 60S-IV86 60°/60° Side/Side 4-∞mm 7.5 32.2mm IV8635X1 AT120D / NF-IV86X1 120° Forward 4-190mm 9.2 ø6.2mm 20.6mm AT120D / FF-IV86X1 120° 25-∞mm 3.3 20.5mm AT80S-IV86X1 80° Side 18-∞mm 4 24.7mm AT120S-IV86X1 120° 6-∞mm 5.9 24.7mm AT60D / 60D-IV86X1 60°/60° Forward/Forward 5-∞mm 7.5 25.9mm AT60S / 60S-IV86X1 60°/60° Side/Side 4-∞mm 7.5 32.9mm * The rigid portion at the scope's distal end when the adapter is mounted Operating Environment Operating temperatures Insertion tube In air: -25 to 100°C Under water: 10 to 30°C Other parts than above In air: -21 to 49°C (with battery) 0 to 40°C (with AC adapter) Operating atmospheric pressure Insertion tube In air: 1013hPa (1 atm) Under water: 1013 to 1772hPa* Other parts than above In air: 1013hPa (1 atm) Operating atmospheric humidity All parts 15 to 90% (relative humidity) Liquid resistance Insertion tube No trouble even when machine oil, light oil or 5% saline is attached. Other parts than above Waterproofing Insertion tube Operable under water with viewing tip adaptor attached*. Not operable underwater with stereo measurement tip adaptors. Other parts than above Operable in blowing rain conditions (Battery compartment must be closed). Not operable underwater. *Excluding IV8635X1 Dimensions

IPLEX FX: Accessories Remote Visual Inspection

Optical Adapter You can change the field of view, direction of view, and depth of field by switching the optical adapter on the scope tip. Battery NP-L7S (Li-ion battery) One battery lasts approximately 2.5 hours under normal operating conditions. Battery Charger JL-2PLUS/OL-0 (115V) JL-2PLUS/OL-1 (220V) Charges two batteries sequentially. Rigid Sleeve MAJ-1737 (for Φ4.0mm dia. insertion tube) Outer Diameter: Φ5.3mm Effective length: 250mm/340mm/ 450mm MAJ-1253 (for Φ6.0mm dia. insertion tube) Outer Diameter: Φ7.5mm Effective length: 250mm/340mm/ 450mm Useful as an auxiliary insertion tool and also makes the scope easier to handle. Simply fit and lock the sleeve onto the insertion tube. Controller Holder MB-937 Allows the handheld controller to be affixed to a tripod, making it useful for prolonged inspections. LCD Monitor Extension Cable SU492400 Allows you to set the LCD monitor at the most suitable position for your inspection. Note: The LCD monitor shown in this photo does not come with this cable. Retrieval Tools MAJ-1353（Snare） MAJ-1354（Alligator） MAJ-1355（Basket） MAJ-1356（Grasper） MAJ-1357（Magnet） Various type of working tools are available. Guide Tube for Inspection of JT8D Engines Provides a second movable joint for incredibly flexible control, which is ideal for inspecting the combustion chamber of JT8D engines. Available on IV8620, IV8635, IV7635, and IV7650. Note: Pratt & Whitney approved for JT8D engine inspection. Guide Tube for IPLEX FX long scopes MAJ-1825-50 (for IV8650) MAJ-1825-75 (for IV8675/ IV8675X2) MAJ-1825-120 (for IV86120) MAJ-1825-180 (for IV86180) Protects the scope and assists in smooth entry when inserting it into a wide pipe.

Iplex FX dedicated web site - click below

http://rvi.olympus-global.com/en/special/iplexfx/